Sciavicco, Lorenzo.
Modelling and Control of Robot Manipulators [electronic resource] / by Lorenzo Sciavicco, Bruno Siciliano. - 2nd ed. 2000. - XXIV, 378 p. 6 illus. online resource. - Advanced Textbooks in Control and Signal Processing, 2510-3814 . - Advanced Textbooks in Control and Signal Processing, .
1. Introduction -- 1.1 Robotics -- 1.2 Industrial Robot -- 1.3 Manipulator Structures -- 1.4 Modelling and Control of Robot Manipulators -- 1.5 Bibliographical Reference Texts -- 2. Kinematics -- 2.1 Position and Orientation of a Rigid Body -- 2.2 Rotation Matrix -- 2.3 Composition of Rotation Matrices -- 2.4 Euler Angles -- 2.5 Angle and Axis -- 2.6 Unit Quaternion -- 2.7 Homogeneous Transformations -- 2.8 Direct Kinematics -- 2.9 Kinematics of Typical Manipulator Structures -- 2.10 Joint Space and Operational Space -- 2.11 Kinematic Calibration -- 2.12 Inverse Kinematics Problem -- 3. Differential Kinematics and Statics -- 3.1 Geometric Jacobian -- 3.2 Jacobian of Typical Manipulator Structures -- 3.3 Kinematic Singularities -- 3.4 Analysis of Redundancy -- 3.5 Differential Kinematics Inversion -- 3.6 Analytical Jacobian -- 3.7 Inverse Kinematics Algorithms -- 3.8 Statics -- 3.9 Manipulability Ellipsoids -- 4. Dynamics -- 4.1 Lagrange Formulation -- 4.2 Notable Properties of Dynamic Model -- 4.3 Dynamic Model of Simple Manipulator Structures -- 4.4 Dynamic Parameter Identification -- 4.5 Newton-Euler Formulation -- 4.6 Direct Dynamics and Inverse Dynamics -- 4.7 Operational Space Dynamic Model -- 4.8 Dynamic Manipulability Ellipsoid -- 5. Trajectory Planning -- 5.1 Path and Trajectory -- 5.2 Joint Space Trajectories -- 5.3 Operational Space Trajectories -- 5.4 Dynamic Scaling of Trajectories -- 6. Motion Control -- 6.1 The Control Problem -- 6.2 Joint Space Control -- 6.3 Independent Joint Control -- 6.4 Computed Torque Feedforward Control -- 6.5 Centralized Control -- 6.6 Operational Space Control -- 6.7 A Comparison Between Various Control Schemes -- 7. Interaction Control -- 7.1 Manipulator Interaction with Environment -- 7.2 Compliance Control -- 7.3 Impedance Control -- 7.4 Force Control -- 7.5 Natural Constraints and Artificial Constraints -- 7.6 Hybrid Force/Position Control -- 8. Actuators and Sensors -- 8.1 Joint Actuating System -- 8.2 Servomotors -- 8.3 Sensors -- 9. Control Architecture -- 9.1 Functional Architecture -- 9.2 Programming Environment -- 9.3 Hardware Architecture -- Appendix A. Linear Algebra -- A.1 Definitions -- A.2 Matrix Operations -- A.3 Vector Operations -- A.4 Linear Transformations -- A.5 Eigenvalues and Eigenvectors -- A.6 Bilinear Forms and Quadratic Forms -- A.7 Pseudo-inverse -- A.8 Singular Value Decomposition -- Appendix B. Rigid Body Mechanics -- B.1 Kinematics -- B.2 Dynamics -- B.3 Work and Energy -- B.4 Constrained Systems -- Appendix C. Feedback Control -- C.1 Control of Single-input/Single-output Linear Systems -- C.2 Control of Nonlinear Mechanical Systems -- C.3 Lyapunov Direct Method.
Fundamental and technological topics are blended uniquely and developed clearly in nine chapters - with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes kinematics, statics and dynamics of manipulators, and trajectory planning and motion control in free space. Technological aspects include actuators, sensors, hardware- and software-control architectures and industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control, and force and motion control are provided. To provide readers with a homogeneous background, three appendices are included on linear algebra, rigid-body mechanics, and feedback control. To impart practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB® code for computer problems; this is available from the publisher free of charge to those adopting this volume as a textbook for courses. "The book has an excellent balance of practical and advanced material (explanations, examples and problems) that take the introductory student to the level that useful research or applications can begin." Wayne Book, Georgia Institute of Technology "Because of its modern treatment and its excellent breadth, "Modelling and Control of Robot Manipulators" is the required text for our core course in the Robotics Ph.D. Program." Matt Mason, Carnegie Mellon University "Sciavicco and Sicilliano’s book achieves a good balance between simplicity and rigour. It is a comprehensive and excellent reference on robotic manipulators, with easy-to-follow notation and figures, lots of examples and a complete bibliography. I strongly recommend it!" Tim Salcudean, University of British Columbia "This is the ultimate reference book in robotics, perfectly balanced between educational scopes and introductory research." Alessandro De Luca, Universita di Roma "La Sapienza".
9781447104490
10.1007/978-1-4471-0449-0 doi
Control engineering.
Robotics.
Automation.
Computer simulation.
Industrial Management.
Mechanics, Applied.
Control, Robotics, Automation.
Control and Systems Theory.
Computer Modelling.
Industrial Management.
Engineering Mechanics.
TJ212-225 TJ210.2-211.495
629.8
Modelling and Control of Robot Manipulators [electronic resource] / by Lorenzo Sciavicco, Bruno Siciliano. - 2nd ed. 2000. - XXIV, 378 p. 6 illus. online resource. - Advanced Textbooks in Control and Signal Processing, 2510-3814 . - Advanced Textbooks in Control and Signal Processing, .
1. Introduction -- 1.1 Robotics -- 1.2 Industrial Robot -- 1.3 Manipulator Structures -- 1.4 Modelling and Control of Robot Manipulators -- 1.5 Bibliographical Reference Texts -- 2. Kinematics -- 2.1 Position and Orientation of a Rigid Body -- 2.2 Rotation Matrix -- 2.3 Composition of Rotation Matrices -- 2.4 Euler Angles -- 2.5 Angle and Axis -- 2.6 Unit Quaternion -- 2.7 Homogeneous Transformations -- 2.8 Direct Kinematics -- 2.9 Kinematics of Typical Manipulator Structures -- 2.10 Joint Space and Operational Space -- 2.11 Kinematic Calibration -- 2.12 Inverse Kinematics Problem -- 3. Differential Kinematics and Statics -- 3.1 Geometric Jacobian -- 3.2 Jacobian of Typical Manipulator Structures -- 3.3 Kinematic Singularities -- 3.4 Analysis of Redundancy -- 3.5 Differential Kinematics Inversion -- 3.6 Analytical Jacobian -- 3.7 Inverse Kinematics Algorithms -- 3.8 Statics -- 3.9 Manipulability Ellipsoids -- 4. Dynamics -- 4.1 Lagrange Formulation -- 4.2 Notable Properties of Dynamic Model -- 4.3 Dynamic Model of Simple Manipulator Structures -- 4.4 Dynamic Parameter Identification -- 4.5 Newton-Euler Formulation -- 4.6 Direct Dynamics and Inverse Dynamics -- 4.7 Operational Space Dynamic Model -- 4.8 Dynamic Manipulability Ellipsoid -- 5. Trajectory Planning -- 5.1 Path and Trajectory -- 5.2 Joint Space Trajectories -- 5.3 Operational Space Trajectories -- 5.4 Dynamic Scaling of Trajectories -- 6. Motion Control -- 6.1 The Control Problem -- 6.2 Joint Space Control -- 6.3 Independent Joint Control -- 6.4 Computed Torque Feedforward Control -- 6.5 Centralized Control -- 6.6 Operational Space Control -- 6.7 A Comparison Between Various Control Schemes -- 7. Interaction Control -- 7.1 Manipulator Interaction with Environment -- 7.2 Compliance Control -- 7.3 Impedance Control -- 7.4 Force Control -- 7.5 Natural Constraints and Artificial Constraints -- 7.6 Hybrid Force/Position Control -- 8. Actuators and Sensors -- 8.1 Joint Actuating System -- 8.2 Servomotors -- 8.3 Sensors -- 9. Control Architecture -- 9.1 Functional Architecture -- 9.2 Programming Environment -- 9.3 Hardware Architecture -- Appendix A. Linear Algebra -- A.1 Definitions -- A.2 Matrix Operations -- A.3 Vector Operations -- A.4 Linear Transformations -- A.5 Eigenvalues and Eigenvectors -- A.6 Bilinear Forms and Quadratic Forms -- A.7 Pseudo-inverse -- A.8 Singular Value Decomposition -- Appendix B. Rigid Body Mechanics -- B.1 Kinematics -- B.2 Dynamics -- B.3 Work and Energy -- B.4 Constrained Systems -- Appendix C. Feedback Control -- C.1 Control of Single-input/Single-output Linear Systems -- C.2 Control of Nonlinear Mechanical Systems -- C.3 Lyapunov Direct Method.
Fundamental and technological topics are blended uniquely and developed clearly in nine chapters - with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes kinematics, statics and dynamics of manipulators, and trajectory planning and motion control in free space. Technological aspects include actuators, sensors, hardware- and software-control architectures and industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control, and force and motion control are provided. To provide readers with a homogeneous background, three appendices are included on linear algebra, rigid-body mechanics, and feedback control. To impart practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB® code for computer problems; this is available from the publisher free of charge to those adopting this volume as a textbook for courses. "The book has an excellent balance of practical and advanced material (explanations, examples and problems) that take the introductory student to the level that useful research or applications can begin." Wayne Book, Georgia Institute of Technology "Because of its modern treatment and its excellent breadth, "Modelling and Control of Robot Manipulators" is the required text for our core course in the Robotics Ph.D. Program." Matt Mason, Carnegie Mellon University "Sciavicco and Sicilliano’s book achieves a good balance between simplicity and rigour. It is a comprehensive and excellent reference on robotic manipulators, with easy-to-follow notation and figures, lots of examples and a complete bibliography. I strongly recommend it!" Tim Salcudean, University of British Columbia "This is the ultimate reference book in robotics, perfectly balanced between educational scopes and introductory research." Alessandro De Luca, Universita di Roma "La Sapienza".
9781447104490
10.1007/978-1-4471-0449-0 doi
Control engineering.
Robotics.
Automation.
Computer simulation.
Industrial Management.
Mechanics, Applied.
Control, Robotics, Automation.
Control and Systems Theory.
Computer Modelling.
Industrial Management.
Engineering Mechanics.
TJ212-225 TJ210.2-211.495
629.8